Aspire Nepho coils are mesh or Kanthal resistors with a value of 0.15 ohm or 0.5 ohm, for use between 60 and 75W.
Replacement cartridge for Aspire Spryte.
Pack of 5 BVC resistors of 1.2 ohm.
Pyrex design decoration Nautilus Hollowed.
Pyrex 5ML the rechange.
mini nautilus pyrex.
Resistors in 0.6 ohm, 1.2 ohm and 1 ohm for nicotine salts.
The Cleito 120, Cleito Exo, Cleito PRO resistors are available in 0.16 Ohms.
This is a 3ml cartridge with a 0.6ohm U-Tech Breeze resistor.
This cartridge holds 4.5 ml with an integrated 1.8 oHm resistor.
Pyrex de rechange 4.2ml.
The Battlestar Squonker 200W kit includes a Battlestar Squonk + Battlestar RDA 24mm.
The Apollo pack is a light, compact and ultra-resistant model.
MTL Tank using 1.5oHm & 1.8oHm resistors.
Its three airflows allow an optimum adjustment in single coil or double coil.
The Artery PAL II is a new compact pod kit with an integrated 1000 mAh battery and two innovative coils.
Replacement Pyrex tube for Nautilus Clearomizer 2S 2.6ML.
Mass Mods and Augvape have joined forces to offer you the best steaming experience.
The Edge pod has two 230mAh batteries, one of which is a spare.
The Tauren Solo RDA is a reconstructable sprayer with a diameter of 24 mm, single coil.
The Breeze 2 has a built-in 1000 mAh battery and is small in size.
The replacement for the famous Dreamer is here! Designed by Stan (tenacioustxvapes).
67 Mod is back with this Rave Mini (Alu version), a BF box with mosfet for electronics, 4ml bottle and 18350 battery. Considered as the smallest BF box on the...
The Aqua Master V2 RTA is made entirely of stainless steel and Pyrex.
The Mi-Pod is an innovative and compact electronic starter kit with a capacity of 2 ml E-Juice and an integrated 950mAh battery.
Bubble Pyrex 4ml.
The MechLyfe Arcless can be used as a stacked (Extension Tube) battery pack, allowing one or two batteries to be connected in series for unrivalled power with a...
Pyrex for Fatality M25 from QP Design.
With its diameter of 24mm, its postless plate for single coil and its airflow located in the upper part of the atomizer, make the Juggerknot Mini, an excellent...
Powered by a YiHi SX260 chipset and equipped with a 1200 mAh battery, the MA VAPE V-POD kit offers an unrivalled pod vape experience.
The Kelpie RTA of Ehpro is a double post atomizer with a capacity of 2ml (extension 3.5 ml).
QP Design's Fatality is a Canadian reconstructible with a 25mm diameter base and a capacity ranging from 2ml to 5.5ml.
The Freemax Fireluke 2 is made for steam production and flavours with a diameter of 24 mm at the base.
Pyrex de remplacement pour Fireluke V2.
The Hala RDTA Gas Mods is a reconctrucible sprayer of 22mm diameter with a capacity of 2ml.
Certified leak-free, the HUB has an easy and innovative filling system.
0.7oHm Mesh coil, 1.2 oHm Ceramic coil
Storage box for POD.
Kit Artery PAL Stick is an AIO kit consisting of an integrated battery of 750mAh and a 1.6 ml atomizer.
The CoilART BRON kit includes a 950 mAh battery, capable of reaching a power of 25W.
Mechlyfe is once again partnering with AmbitionZ Vaper! After the success of MOD Arcless, here is the last born of the brand the Slatra.
The Diggadampf is a high-end resistive Ni80 wire made in Germany with a length of 4.5 meters.
Made of durable stainless steel, the Mod Cold Steel was designed in collaboration with German reviewer Nebelfee.
2ml cartridge for Oukiel Bison.
Replacement Pyrex for Falcon Horizon King.
New version of the TRVP dripper with a ceramic deck and made of brushed steel.
The Pod Artery PAL 2 Pro is a system integrating a 1000 mAh battery with a 6063 aluminium alloy chassis.
Endowed with a power of 80W, this kit is composed of a tube using an 18650 battery and the Falcon King Tank.
The Cthulhu Mulan MTL RDTA has a lim and long 510 drip tip and restricted lateral airflow hole for MTL vaping experience.
The Wasp Nano MTL has a capacity of 2ML and a diameter of 22mm. Filling is from the top and different airflow options are possible.
This RTA of 24 mm diameter, offers a DL or MTL valve thanks to its two interchangeable airflow rings.
The Tenacious Constant Contact Mechanical Mod is designed by Tenacious reviewer Stan and produced by Unicorn vape in Canada.
Ø24mm diameter driver with pin bottom feeder included and 2-way postless clamp plate.
Pyrex tube 4ML for QP Design GATA RTA.
The Fatal Mod QP Design is capable of delivering up to 100 watts and features volt management and temperature control.
Pack of 100 pieces of Chubby Gorilla Drip Tips.
Patented 100% organic cotton, heat resistant up to 300°C.
1.5ML capacity equipped with 1.4oHm coil and leak proof.
Mesh resistance 0.6ohm - 15 to 23W - Direct inhalation.
Protective silcione for Juul.
Silicone cigarette blower with a diameter of 22mm.
The Uwell Crown Pod Kit is powered by a built-in 1250 mAh battery with 25W power.
The Uwell MarsuPod PCC kit give you long-lasting vaporization.
These replacement pods are designed for use with the MarsuPod kit and are optimized for nicotine salt e-liquids.
A POD for beginners and experienced vaporizers, slim and practical, design and elegant, available in several colours. A protection system that ensures a safe and...
Replacement cartridges for UWELL's POD Zumwalt. Available in 0.6 OHM or 1.2 OHM, sold in sets of 2. Flavors guaranteed by Pro-FOCS testing.